Pivot Weights · The puzzle notebook

Read your first six beams in Pivot Weights

Complete the First Balance board with weights 1, 2 and 7. Use one beam to place a weight, check its effect in the other direction, and diagnose a full grid with the final two weights swapped.

In Pivot Weights, a single weight changes two readings. It contributes to the beam along its row and to the beam along its column. The readings can differ because the two beams have their own pivot positions. In this lesson, you will place three weights and check all six beams.

Load First Balance

Use Practice this example beside the article, or choose Load beginner board in the game. Confirm Board 1 of 5 · First Balance and Edits 0. The dots in the grid below mark the empty slots. The six starting weights are fixed. The unused weights are 1, 2 and 7.

        C1 C2 C3
Row 1    4  ·  9
Row 2    ·  5  ·
Row 3    3  8  6

Select an unused weight and then select an unlocked slot. If the slot already has a movable weight, the new one takes its place and the old one returns to the tray. With the tray selection cleared, selecting a filled movable slot lifts its weight. To clear a tray selection, select that weight again. With a keyboard, Tab reaches the tray and grid. Use arrow keys between slots, type an available digit to place it, or press Delete to lift a movable weight.

Read a beam from its first slot to its last

A row's arms are written left to right. A column's arms run top to bottom. A pivot in the first gap gives arms −1, +1, +3. A pivot in the second gap gives arms −3, −1, +1. A weight on a negative arm subtracts from the reading. A weight on a positive arm adds to it. Multiply each weight by its arm and add the three products. Empty slots contribute zero.

For row 1, weight 4 contributes −12 and weight 9 contributes +9, so the starting reading is −3. The target is −4. The middle slot has arm −1, so weight 1 there adds −1 to the reading and meets the target. On column 2 the same weight also contributes −1, taking that column from 29 to its target of 28.

First Balance beam arms and targets
BeamArmsTarget
R1−3, −1, +1−4
R2−1, +1, +3+4
R3−1, +1, +3+23
C1−3, −1, +1−16
C2−1, +1, +3+28
C3−3, −1, +1−23

Place the two remaining weights

  1. Place 1 at R1C2. Row 1 and column 2 now match their targets. Along with row 3, that makes three matching beams.
  2. Look at column 3, where the fixed 9 and 6 give −27 + 6 = −21. The target is −23 and the only missing slot has arm −1. Place 2 at R2C3. Column 3 now matches. At this point row 2 reads +11 because its right slot uses arm +3.
  3. Place 7 at R2C1. Its row arm of −1 takes row 2 from +11 to +4. Its column arm of −1 takes column 1 from −9 to −16.
  4. Select Check beams. A win requires all nine slots filled with the nine weights used once and all six readings equal to their targets. The completed board can be reopened with Undo last edit. Retry this board restores the fixed starting weights and the tray. New puzzle opens another layout.

At the starts of later boards, any beam may already match its target by coincidence. The value to watch is how the reading changes when you place or lift a weight. Check the other beam through the same slot before committing to a placement.

Try a full grid with the last weights swapped

Retry, place 1 at R1C2 again, then place 7 at R2C3 and 2 at R2C1. Before selecting Check beams, work out row 2 and column 3. Decide which three beams still match.

Self-check · Read each signed contribution

Row 2 reads −2 + 5 + 21 = +24, compared with the target +4. Column 3 reads −27 − 7 + 6 = −28, compared with −23. Column 1 reads −12 − 2 + 3 = −11, compared with −16. The matches are row 1, row 3 and column 2, so Check beams reports three of six matching.

Lift the 7 from R2C3 with the tray selection cleared. Then place 7 from the tray at R2C1. The displaced 2 returns to the tray, ready for R2C3. Check again after both slots are correct. Retry is also available if you want to replay the three correct edits from the start.